How to tell cervical, thoracic and lumbar vertebrae apart
Cervical vertebrae have a hole in each transverse process, thoracic vertebrae have facets for the ribs, and lumbar vertebrae have neither, with the largest bodies of the three.
Those features are the quickest way to sort a loose vertebra. This guide puts the regional differences in one table, turns them into three questions you can ask of any vertebra, and covers the transitional vertebrae that blur the borders.
Cervical vs thoracic vs lumbar vertebrae at a glance
The adult spine has 7 cervical, 12 thoracic and 5 lumbar vertebrae above the sacrum and the coccyx. The OpenStax chapter on the vertebral column explains why they differ: cervical vertebrae are smaller than lumbar vertebrae because they support a smaller share of the body's weight, and thoracic vertebrae carry sites for rib attachment. The table brings together the features that matter in a practical, with details from our Bone Atlas.
| Feature | Cervical | Thoracic | Lumbar |
|---|---|---|---|
| Number | 7 | 12 | 5 |
| Body | Small and oval, wider from side to side | Larger; heart-shaped in our atlas | The largest; thick and kidney-shaped |
| Transverse foramen | Yes, in each transverse process | No | No |
| Rib facets | No | Yes, on the body, and on the transverse processes of T1 to T10 | No |
| Spinous process | Short and bifid from C3 to C6; long at C7 | Long, angled sharply downward | Short, broad and nearly horizontal |
| Vertebral foramen | Large and triangular | Narrow and circular | Triangular, larger than in the thoracic region |
Two rows do most of the work: the transverse foramen and the rib facets. The other rows help you confirm the answer or place a vertebra within its region.
How to tell vertebrae apart in three questions
O'Rahilly's Basic Human Anatomy, hosted by Dartmouth, sums up the key feature of each region in one line: foramina transversaria for the cervical vertebrae, articulation with ribs for the thoracic ones, the absence of both for the lumbar ones, and fusion for the sacrum. Turned into questions, that gives a check you can run on any loose vertebra:
- Is there a hole in each transverse process? If yes, the vertebra is cervical: the transverse foramen is the mark of the neck.
- If not, are there facets for ribs? Look on the side of the body and on the transverse processes. If you find them, the vertebra is thoracic.
- If neither, is the body large and thick? Then the vertebra is lumbar.
Ask the questions in this order. The transverse foramen is the most specific feature, so it settles the cervical region first. Rib facets come second because T11 and T12 have no facets on their transverse processes, so you need to check the body as well, as the section on transitional vertebrae explains.
The hole that marks a cervical vertebra
Each cervical transverse process has an opening, the transverse foramen. In the upper six cervical vertebrae, these foramina carry the vertebral artery up toward the brain. The body is small, because the neck carries the least weight, and the spinous process of C3 to C6 is short and bifid, split into a Y. The transverse processes are sharply curved, U-shaped, to let the cervical spinal nerves pass, and the articular processes are flattened and face mostly up or down.
Three cervical vertebrae look different from the rest. The atlas, C1, has no body and no spinous process, only an anterior and a posterior arch. The axis, C2, carries the dens, a projection that articulates with the anterior arch of the atlas. At the other end, C7 has a long, undivided spinous process, the prominent bump you can feel at the base of your neck. Our cervical vertebrae page covers the rest, including the uncinate processes on the upper surface of the bodies.
Rib facets on a thoracic vertebra
Thoracic vertebrae are built around the ribs. Most have two costal facets on the sides of the body, for the head of a rib, and a further facet on each transverse process, for the tubercle of a rib. Our atlas notes that these transverse facets are present from T1 to T10. The superior articular processes face anteriorly and the inferior ones posteriorly, an orientation that shapes the movements of the thoracic region.
The spinous process is the other giveaway. In a typical midthoracic vertebra it is long and angled sharply downward, so it overlaps the vertebra below like a shingle. The vertebral foramen is narrow and circular, smaller than in the neck or the lower back. Sources disagree on the body: our thoracic vertebrae page describes it as heart-shaped, while O'Rahilly calls the typical thoracic body kidney-shaped. That disagreement is a good reason not to rely on the outline of the body alone.
Why a lumbar vertebra is the biggest
Lumbar vertebrae carry the greatest share of body weight, so they have the largest and thickest bodies of the movable spine. O'Rahilly describes them as large vertebrae with neither transverse foramina nor costal facets, and with a kidney-shaped body. Their transverse processes are short, and their spinous process is short and blunt and points straight back; our atlas compares its broad, flat, nearly horizontal outline to a hatchet. The articular processes are large, with the superior ones facing backward and the inferior ones facing forward.
Two smaller features help when you hold the bone: the mammillary processes on the superior articular processes, and the accessory processes on the transverse processes, both sites of muscle attachment. Our lumbar vertebrae page shows where to find them.
How to tell transitional vertebrae apart
Vertebrae at the borders between regions mix features, so they are the ones to check twice. O'Rahilly describes T1, like C7, as transitional in appearance. C7 already has a long spinous process, closer to a thoracic one, but it keeps the opening in its transverse processes, so the first question still classifies it as cervical.
At the lower end, our atlas notes that T11 and T12 share features with lumbar vertebrae. They have no facets on their transverse processes, since those stop at T10, but they still carry facets on the body for the heads of their ribs. Look at the side of the body before you call one of them lumbar, and use the size and the spinous process only to confirm.
How to remember vertebrae shapes
A familiar memory aid ties the numbers to meal times: breakfast at 7, lunch at 12 and dinner at 5. For the shapes, give each region one job and one picture:
| Region | Its job | Picture to remember | What to check |
|---|---|---|---|
| Cervical | Lets the vertebral artery pass | A short spinous process split into a Y | A hole in each transverse process |
| Thoracic | Holds the ribs | Spinous processes overlapping like shingles | Facets on the body and on the transverse processes |
| Lumbar | Carries the weight | A spinous process shaped like a hatchet, pointing straight back | A large body with no transverse foramen and no rib facet |
Say the job and the check aloud each time you pick up a vertebra, and repeat until you can run the three questions without the table.
Cervical, thoracic and lumbar vertebrae before the practical
Sort a mixed set of vertebrae into three piles using only the three questions, then check your piles against the first table. Place each vertebra within its region afterwards: the atlas, the axis and C7 stand out in the neck, while T11 and T12 sit at the border with the lumbar region. When you revise from photos, Osteo+ can name the bone in the picture, so you can confirm each region before you move on to the next one.
Frequently asked questions
How do you tell cervical, thoracic and lumbar vertebrae apart?
Check for a hole in each transverse process first, because that marks a cervical vertebra. If there is none, look for rib facets, which mark a thoracic vertebra; a large body with neither feature is lumbar.
Do lumbar vertebrae have transverse foramina?
No. Lumbar vertebrae have neither transverse foramina nor costal facets, which is one of the quickest ways to recognize them.
Which vertebrae have bifid spinous processes?
Typical cervical vertebrae, from C3 to C6, have short bifid spinous processes. C7 has a long spinous process without a split, which is why you can feel it at the base of the neck.
How many cervical, thoracic and lumbar vertebrae are there?
There are 7 cervical, 12 thoracic and 5 lumbar vertebrae. Below them, the sacrum and the coccyx are formed by fused vertebrae.
Why are lumbar vertebrae so big?
They carry the greatest share of body weight, so their bodies are the largest and thickest. Cervical vertebrae carry the least weight and have the smallest bodies.
Scan your first bone for free.
Download the app and identify a bone in the next 30 seconds.