Siding a bone: how to tell left from right, one landmark at a time
To tell whether a bone is from the left or right side, orient it the way it sits in the body, then check which way its medial landmark points. Siding comes down to three axes first and one landmark after.
Practical exams ask for the side because naming it shows that you can place the bone in three dimensions. The routine below works on every paired bone of the limbs and girdles, and the two tables list the landmarks to look for.
1. Find the three axes before you pick a side
Every paired bone has three axes, and the side only means something once you have all of them. Work through them in this order, with the bone in your hands:
- Proximal or distal. Find the end that sits closer to the trunk. On long bones it is usually the end with a rounded head or the widest joint surface.
- Anterior or posterior. Find the back of the bone: a deep fossa, a rough ridge for muscles, or condyles that bulge backward.
- Medial or lateral. Find a landmark that faces the midline of the body, such as a head that fits a socket or a notch that meets the neighboring bone.
Then apply one rule. Hold the bone with its proximal end up and its back facing you, as if you stood behind the person. A right bone now shows its medial landmarks on your left and its lateral landmarks on your right. A left bone shows the mirror image. To check by touch, hold the bone alongside your own limb with its front facing forward: when its medial landmark points toward your midline, the bone matches the side you are holding it on.
The siding tips of the LibreTexts anatomy lab manual use the same logic bone by bone. This table sums up the landmarks for the six long bones.
| Bone | Proximal end | Medial landmark | Back of the bone |
|---|---|---|---|
| Humerus | Round head | Head and medial epicondyle | Olecranon fossa |
| Radius | Small disc-shaped head | Ulnar notch at the wrist | Dorsal tubercle at the wrist |
| Ulna | Olecranon | Styloid process at the wrist | Olecranon and posterior border |
| Femur | Head on a long neck | Head and lesser trochanter | Linea aspera and condyles |
| Tibia | Wide plateau with two condyles | Medial malleolus | Soleal line |
| Fibula | Small knob-shaped head | Joint facet of the lateral malleolus | Malleolar fossa |
2. How to tell if a humerus bone is left or right
Start at the proximal end. The round head sits on the anatomical neck and faces medially and slightly backward, toward the glenoid cavity of the scapula. The greater tubercle stands on the lateral side and the lesser tubercle on the front, with the intertubercular groove running between them.
Then read the distal end. The olecranon fossa is the deep pit on the back, and the medial epicondyle is the larger and more prominent of the two epicondyles. With the head up and the olecranon fossa facing you, a right humerus points its head to your left.
Two mistakes are easy to make here. Students read the intertubercular groove as posterior because it looks like a groove for something behind, and they mix up the shallow coronoid fossa in front with the olecranon fossa behind. The olecranon fossa is the deeper of the two, so use it as your anchor. You can review each of these landmarks in the humerus guide of our Bone Atlas.
3. Siding the radius and the ulna
The two forearm bones are easiest to side as a pair, because each one carries a notch for the other. In anatomical position the radius is lateral, on the thumb side, and the ulna is medial.
- Radius. The small disc-shaped head is proximal. At the wrist the styloid process points laterally and the ulnar notch faces medially, while the dorsal tubercle marks the back. With the head up and the dorsal tubercle facing you, a right radius has its styloid process on your right.
- Ulna. The olecranon, the hook that forms the point of the elbow, is proximal and posterior. The trochlear notch faces forward, and the radial notch sits on the lateral side of the coronoid process, where it meets the head of the radius. With the olecranon up and its back facing you, a right ulna has its radial notch on your right.
If you only have the distal radius, the ulnar notch alone gives you the medial side, and the flat, slightly concave front surface gives you the anterior side. Those two facts are enough to side it.
4. Siding the clavicle and the scapula
The clavicle has two different ends. The sternal end is round and sits medially, and the acromial end is flat and sits laterally. The upper surface is smooth, the lower surface is rough, and the conoid tubercle lies underneath near the lateral end. Seen from above, the medial two thirds bow forward and the lateral third curves backward.
Hold it over your own collarbone with the smooth surface up, the round end at your midline and the conoid tubercle underneath toward the back. If the flat end reaches your right shoulder, it is a right clavicle.
For the scapula, find the glenoid cavity, the shallow socket for the head of the humerus, and the spine on the back surface. The glenoid faces laterally and the spine is posterior, with the acromion and the coracoid process above the glenoid. With the spine facing you and the glenoid up and to the side, a right scapula has its glenoid on your right.
5. How to tell if a femur bone is left or right
The femur follows the same rule as the humerus. The head points medially toward the acetabulum, the greater trochanter stands out on the lateral side, and the lesser trochanter projects from the back and inner side just below the neck. The linea aspera, a rough ridge down the back of the shaft, and the two condyles that bulge backward show you the posterior surface.
Hold it with the head up and the linea aspera facing you: a right femur points its head to your left. The virtual femur lab of the University of Wisconsin adds a check that uses the angle of the shaft. Stand the bone on its condyles and look at it from behind: the shaft leans outward toward the side the bone comes from, to your right for a right femur.
Watch the lesser trochanter. If it ends up in front or on the outer side, the bone is upside down or turned around. The femur page of our Bone Atlas lists every landmark named here.
6. Siding the hip bone, the tibia and the fibula
The hip bone is quick to side once you know where to look. Hold it with the acetabulum facing you and the iliac crest up. The pubis then points forward and the greater sciatic notch backward, so the pubis points to the side the bone comes from: to your right for a right hip bone. The obturator foramen, below and in front of the acetabulum, confirms the orientation. Our hip bone guide shows how the three parts of the bone meet at the acetabulum.
For the tibia, the wide plateau with two condyles is proximal, the sharp anterior border runs down the front, and the medial malleolus hangs on the inner side of the ankle. For the fibula, the knob-shaped head is proximal and the lateral malleolus is distal. Its joint facet faces medially toward the talus, and the malleolar fossa sits just behind that facet.
The girdle bones do not have a proximal end in the same sense, so side them with the landmark that faces laterally:
| Bone | Faces laterally | Landmark that gives the side |
|---|---|---|
| Clavicle | Flat acromial end | Conoid tubercle, underneath and toward the back |
| Scapula | Glenoid cavity | Spine on the posterior surface |
| Hip bone | Acetabulum | Pubis in front, greater sciatic notch behind |
7. Siding bones practice before the practical
Siding becomes automatic after a few rounds of deliberate practice. This routine fits in ten minutes a day:
- Pick three paired bones at random from your lab box or your photos.
- Say the three axes out loud before you name the side: proximal, back, medial.
- Write the side, then check it against the tables above.
- Keep a list of the bones you got wrong and start the next session with them.
Photos help between lab sessions. Take pictures of each bone from the front and from the back, then quiz yourself on the side a few days later. Osteo+ can check your answer: it names the bone and its side from a photo, so you can confirm your reasoning when no instructor is around.
Mistakes that cost points on exam day
Most wrong answers come from skipping a step. Students name the side before finding the back of the bone, or they hold the bone upside down and read the mirror image. Say the three axes every time, even when the answer seems obvious.
The other trap is the midline. Vertebrae, the sternum and the sacrum have no side, so an examiner who asks for one is checking that you know it. Answer that the bone sits on the midline and has no side.
Frequently asked questions
What does siding a bone mean?
It means working out whether a bone comes from the left or the right side of the body. You orient the bone in anatomical position and read where its medial and lateral landmarks point.
Which way does the head of the humerus point?
It points medially, toward the glenoid cavity, and slightly backward. With the olecranon fossa facing you and the head up, a right humerus has its head on your left.
How do you tell if a femur is left or right?
Hold it with the head up and the linea aspera facing you. The head points to your left on a right femur and to your right on a left femur.
Can you side a vertebra or the sternum?
No. Vertebrae, the sternum and the sacrum sit on the midline, so they have no left or right. Siding only applies to paired bones.
How do you side a broken or incomplete bone?
Look for any part that still shows two axes, such as a condyle with its joint surface or a notch with its opening. If no landmark is left, record the side as undetermined.
Scan your first bone for free.
Download the app and identify a bone in the next 30 seconds.